Personal tools
Jump to: navigation, search

A Numerical solution to math Models on the Thermal Performance of Micro Flat Heat Pipes

by Emma M. Evangelista
Thesis (MS Chemical Engineering) - University of the Philippines Diliman, 2007

Abstract

This study presents a computer program solution to mathematical models of micro flat heat pipes with different grooved wick geometries in predicting their thermal performance. A parallel math model is developed and solved using a numerical program. The model developed is used to thermally characterize micro flat pipes using different wick geotries such as as trapezoidal sinusoidal, rectangular grooves. Thermal characterization involves data generation on the following parameters: axial variation of liquid and vapor pressure drops which determines the necessary capillary pressure needed for continuous operation axial variation of radius of curvature of liquid-vapor interfacial meniscus which describes the continuous wetting of the wick structure and variation of maximum heat transport capability with temperature range which describes the effective cooling capacity of the flat heat pipe. Numerical computations are performed for the four wick geometries using two separate working fluids: ammonia and water. The program is validated by comparing the results obtained with existing literature values. This study is a useful tool in design applications for micro flat heat pipes utilizing different groove geometries.

Subject Index : Heat Pipes

  • This page was last modified on 2 March 2016, at 14:32.
  • This page has been accessed 3,288 times.
The Fine Print: contents on this site are owned by whoever posted them (as indicated on the page History). Neither the DILC nor the University is responsible for them in any way. DILC reserves the right to delete them if they are deemed in violation of the University's Acceptable Use Policy and other applicable laws.